Serie APMQ UV: Aplanatic Meniscus Lenses

• UV Grad Fused silica
  
• use in combination with LAPQ to obtain f/3.3 relative aperture
  
• Air spaced design for high power and UV laser applications
  
• Excimer focusing triplet lens
  
• Mount easily into 200-1.25 mirror mount

Serie LAP & LAN:High Energy Laser Aplanats

• Substrate material SF11
  
• Air spaced design for high energy laser application

Serie LAPQ & LANQ: High Energy UV Laser Aplanats

• Fused silica
  
• Air spaced fused silica design for high energy or UV applications
  
• Aplanats correct for sphericcal aberration and coma
  

Application include:

• Beam handling interferometer
  
• Material ablation
  
• Cutting systems

Serie YAP & YAP: High Energy-1064/532nm Laser Achromats

• BK7 and SF11 glass
  
• Air spaced design for high energy laser application
  
• IR spaced design for high power laser applications
  
• Same focal length for 1064 and 532nm
  
• All surface AR coated for both 1064nm and 532nm

Serie HAN & HAP: High Energy-1064/633nm Laser Achromats

• BK7 and SF11 glass
  
• Air spaced design for high energy laser application
  ir spaced design for high power laser applications
  
• same focal length for 1064 and 633nm
  
• All surface AR coated for both 1064nm and 633nm

A multi-element lens system is required when the aberration of a singlet lens are too large to satisfy focusing requirements. CVi offers two and three elements lenses for use at a focal ratios where singlet fail due to spherical aberration.

Serie UVAP: CVi has design this serie of lenses for focusing large diameter excimer laser beams and for other monochromatic ultraviolet imaging applications.


Application include:

• beam delivery systems for Excimer photoablation experiments
  
• Raman shifted Excimer LIDAR setups

Serie APM: Aplnatic Menicus Lenses

• BK7 glass
  
• use in combination with LAP to obtain f/3.3 relative aperture
  
• Air spaced design for high power laser applications
  
• Diffraction limited performance

Serie UVO: Objective Lenses

• Air spaceed doublet or triplet design for maximum UV transmission
  
• Focal length determined at λ=355nm
  
• housing : standard Royal Microscope society screw threads (0.8"x 36TPI)
  
• Infinite conjugate ratio desing
  
• Ideal for micromachining, laser, scribing, and microlithography

Serie AAP & AAN

• Diffraction limited performance 0.75λ TWd typical
  
• Focal length from 25mm to 2000mm
  
• 10-5 surface quality
  
• CVi Low loss 450-750nm BBAR coating incuded

Serie FAP:Fast Achromat

• Two cemented doublet air spaced design for fibre optic coupling application
  
• Infinite conjugate ratio desing
  
• CVi Low loss 450-750nm BBAR coating incuded
  
• Low f /# aplanatic achromat positive lens system