| |||
The ML-CW-R-TKS-1550 “Turn Key System“ is a compact CW Fibre Laser delivering up to 20W of output power, through a near diffraction limited beam (M²<1.1). The excellent beam quality and power stability make the Manlight Fibre Laser a multi-purpose tool. Our patented “Injection Technology” allows the use of highly reliable broad area laser diode pumps, for a cost-effective and maintenance-free operation. The all-fibre design guarantees the robustness of the laser, without any optical parts to align or to stabilise. The simple integration of the Bench Top system requires no after-installation service. The ML-CW-R-TKS-1550 is the ideal solution for a broad range of industrial and scientific applications. This 20W laser is also available in a compact OEM format under part number ML-CW-R-OEM-1550.
The MLT-PL-R-OEM is a very compact (90 x 70 x 15 mm3 only) pulsed fiber laser providing short to ultra short pulse duration (2ns to 50ns pulse duration available) through a near diffraction limited randomly polarized beam (M²<1.1). The MLT-PL-R-OEM is optimised for LIDAR, telemetry or range finding application. The design and configuration of this amplifier render it unique and reliable. Our patented “Injection Technology” allows the use of highly reliable broad area laser diode pumps, for a cost-effective and maintenance-free operation. The all-fibre design guarantees the robustness of the system, without any optical parts to align or to stabilise. The simple integration of the OEM system requires no after-installation service.
The ML-PL-R-OEM serie is a high power pulsed fiber laser at 1,5µm delivering energies up to 100µJ per pulse, through a near diffraction limited beam (M²<1.1). The excellent beam quality and power stability make the Manlight Fibre Laser a multi-purpose tool. Our patented “Injection Technology” allows the use of highly reliable broad area laser diode pumps, for a cost-effective and maintenance-free operation. The all-fibre design guarantees the robustness of the laser, without any optical parts to align or to stabilise. The simple integration of the OEM system requires no after-installation service. The ML-PL-R-OEM is the ideal solution for LIDAR applications.
The Manlight Micro EDFA offers excellent optical performance and reliability in an ultra compact form factor. This Micro EDFA is intended for single channel and narrowband applications in the C-band wavelength range. It can be optimized to perform as a booster, line or pre-amplifier in DWDM systems and subsystems for metro and long haul applications. The gain block contains input and output monitor diodes and isolators. The Micro EDFA uses an uncooled pump laser that enables low power consumption which allows system designers to achieve compact solutions, lower costs and flexibility in system design.
The Manlight compact EDFA is field proven and offers excellent optical performance and reliability. The compact EDFA gain block is intended for DWDM applications in the C- & L-band wavelength range. It can be optimized to perform as a booster, line or pre-amplifier in DWDM systems and subsystems for metro and long haul applications. The gain block contains input and output monitor diodes and isolators. The EDFA can be configured to use an uncooled pump laser that enables low power consumption which allows system designers to achieve compact solutions, lower costs and flexibility in system design.
The Manlight Compact EDFA gain module with integrated control electronics is suitable for DWDM systems where fast transient control and gain flattening is required. It can be optimized to perform as a booster, line and pre-amplifier in systems and subsystems for metro and long haul applications. It operates in constant gain, constant power mode or in constant current mode. The gain block contains input and output monitor diodes and isolators. The EDFA can be configured to use an uncooled pump laser that enables low power consumption which allows system designers to achieve compact solutions, lower costs and flexibility in system design.
The Manlight High Power Amplifier for CATV and FTTx applications offers a cost effective solution in bringing the bandwidth closer to the end users. With a unique design based on Manlights in-house pump combiner and optical know-how, the high power amplifiers are optimized to offer high power and low noise figure with proven reliability and quality. The output power can be distributed between 1 to 16 output ports. The use of efficient and reliable uncooled pump diodes allows the Manlight amplifiers to reach high output powers with low overall power consumption. The control electronics featuring alarms, automatic shutdown, and RS-232 communication interface is driven by a 5 / 24 VDC power supply.
The Manlight high power bench top amplifiers are optimized to offer high performance and low noise figure with proven reliability and quality. These amplifiers are intended to be used in various domains like high speed optical transmissions, booster amplifier for transmitters, sensors as well as test and measurement setups. Featuring on board control electronics capabilities, these PM EDFAs can be operated in variety of control modes including Automatic Current Control (ACC), Automatic Power Control (APC) or Automatic Gain Control (AGC). Delivered with standard GPIB and RS-232 interfaces, these units offer a user-friendly interface ideal for PC-remote-controlled system experiments. Available in a 155.5 x 257 x 376 mm package.
The Manlight high power polarization maintaining bench top amplifiers are optimized to offer high performance and low noise figure with proven reliability and quality. These amplifiers are intended to be used in various domains like high speed optical transmissions (polarization multiplexing), PM transmitters, sensors as well as test and measurement setups. Featuring on board control electronics capabilities, these PM EDFAs can be operated in variety of control modes including Automatic Current Control (ACC), Automatic Power Control (APC) or Automatic Gain Control (AGC). Delivered with standard GPIB and RS-232 interfaces, these units offer a user-friendly interface ideal for PC-remote-controlled system experiments.Available in a 155.5 x 257 x 376 mm package.
The Manlight Compact Multi-Port Gain Block for CATV and FTTx applications offers a cost effective solution in bringing the bandwidth closer to the end users. With a unique design based on Manlights in-house pump combiner and optical know-how, the high power amplifiers are optimized to offer high power and low noise figure with proven reliability and quality. The output power can be distributed between 1 to 8 output ports. The use of efficient and reliable uncooled pump diodes allows the Manlight amplifiers to reach high output powers with low overall power consumption.
The Manlight Variable Gain Amplifier is the next-generation controlled amplifier with two independent variable gain stages that enables significant cost and space saving. With state-of-the-art transient suppression control and best in class optical performance the Manlight variable gain amplifier is well suited for agile networks with reconfigurable optical add/drop nodes (ROADM) and varying link budgets. Designed for use in the long haul and Metro DWDM optical networking systems, where the ability to respond to changing conditions is a key requirement.
The ML-EYFA-CW-SLM-P-TKS, is a compact CW Fibre Amplifier delivering up to 10W of output power, through a near diffraction limited linearly polarized beam (M²<1.3). The ML-EYFA-CW-SLM-P-TKS is optimised for the amplification of Single Longitudinal Mode (SLM) laser sources of down to 10kHz instantaneous Full Width at Half Maximum (FWHM). The design and configuration of this amplifier render it unique and reliable. The power is delivered trough a polarized beam with typically 17dB of Polarization Extinction Ratio (PER) and with excellent power stability. Our patented “Injection Technology” allows the use of highly reliable broad area laser diode pumps, for a cost-effective and maintenance-free operation. The all-fibre design guarantees the robustness of the amplifier, without any optical parts to align or to stabilise. The simple integration of the Bench Top system requires no after-installation service.
| |||
