The BFP serie high power fiber coupled laser diode is available from few Watt up to 600W of output power.

Fiber Coupled Pumping Module BFP Serie:

• CW Output Power 6 to 600 W
• Center Wavelength 635nm to 1500 nm
• Fiber core diameter: 100-200-400µm
• Fibre NA: 0.15 or 0.22NA

Applications:
• Fiber Laser Pumping
• - DPSS Laser Pumping
• - Medical Lasers
• - Cutting, Soldering

• and Welding
• - Illumination
• - Marking
• - Instrumentation
• - Ranging

Bright Solutions

Fiber Coupled Pumping Module - BFP Serie

Fiber Coupled Diode Lasers BDL Serie-5 to 500 W of laser power through 0.22 NA multimode optical fibres with 200 to 600 μm core.

Main Features:
• CW Output Power 5 to 500 W
• Center Wavelength 808-915-940-976-980-1064-1340-1500 nm
• Spectral Width (FWHM) 3 to 5 nm
• Fiber Connector SMA-905
• 100um to 1000 um fibers

Applications: Solid-state laser pumping, Fiber laser pumping, Soldering & Welding, Medical ,Instrumentation, Ranging

Bright Solutions

Fiber Coupled Laser Diode Modules -BDL

High Peak Power Diode Pumped Solid State Laser - LUCE Serie is Q-switched CW up to 40W - Serie WEDGE Short Pulse Q-switching at up to 2mJ and a peak power up to 2MW.

LUCE Options Available:
• Wavelength: 1064nm, 532nm and UV 355nm
• up to 150kW peak power
• Low frequency extended range : single shot to 100 kHz
• High-frequency extended range up to 200 kHz
• CW Operation

WEDGE Serie:
• Less than 1.5 ns pulse duration
• Up to 1 MW peak power
• Low heat waste, air cooling
• Harmonic options available : Second harmonic @ 532 nm - Third harmonic @ 355 nm

Applications:

Material processing,Marking, Scribing,Thin film removal, Micro-machining

Bright Solutions

DPSS Lasers -Q-Switched Short Pulse

NL130 series electro-optically Q-switched nanosecond Nd:YAG lasers provide up to 1200 mJ per pulse with excellent stability.

Innovative, self-seeded master oscillator design results in Single Longitudinal Mode (SLM) output without use of expensive seed laser diodes and cavity locking electronics.
The NL130 series Q-switched nano-second lasers are an excellent choice for many applications, including OPO or dye laser pumping, holography, LIF spectroscopy, material processing, optics testing and other tasks. Low jitter of the optical pulse in respect to the triggering pulse allows reliable synchronization of laser with external equipment.
The optional second (SH) (for 532 nm), third (TH) (for 355 nm) and fourth (FH) (for 266 nm) harmonics generators pro-vides access to shorter wavelengths.Compact powering group of the laser easily fits under most of the optical tables.
For customer convenience the Q-switched laser can be controlled through RS232 port from PC using supplied LabView drivers and/or from user-friendly remote control pad. Both options enable easy control of laser settings.

Features :

• Up to 1200 mJ pulse energy
• Self-seeded Single Longitudinal Mode master oscillator
• Excellent pulse energy stability
• Up to 50 Hz pulse repetition rate
• 3 ns pulse duration (7 ns optional)
• Thermo stabilized harmonics options
• Remote control via keypad
• PC control through RS232 port with supplied LabView drivers
• Chiller cooling option

Ekspla

NL 130 Series High Energy SLM Nanosecond ND:YaG Lasers

Foxtrot series picosecond diode pumped laser offers up to 1 mJ pulse energy at 1064 nm.

It features short <60 ps pulse duration, 4 kHz repetition rate, 532 nm and 355 nm harmonics options and excellent beam quality (M² < 1.3).
Stable output parameters and rugged cost-effective design establish Foxtrot series lasers as an ideal choice for micromachining applications.

Features :

• up to 1 mJ pulse energy
• 4 kHz repetition rate
• Short <60 ps pulse duration
• High stability and excellent beam quality M2<1.3
• Reliable hands-free operation
• Compact, sealed and rugged design
• PC control and remote control keypad
• Low maintenance costs
• Single-phase powering
• No external cooling water

Applications :

• Drilling
• Cutting
• Paterning
• Structuring
• Ablation
• Micromachining

Ekspla

Foxtrot High Pulse Energy DPSS Picosecond Laser

Fusion series diode pumped solid state Nd:YVO4 lasers features two operation modes.

In one operation mode Fusion laser provides high pulse energy at low repetition rates. In another operation mode Fusion provides high up to 100 kHz repetition rate.
The user may benefit all advantages of low and high repetition rates by having only one laser - Fusion.

Features :

• Two operation modes
• Low repetition rate mode for high pulse energy
• High repetition rate mode for up to 100 kHz repetition rate
• Robust and sealed cavity
• Low operating costs
• Electro-optical Q-switching
• First pulse suppression
• Internal output power monitoring
• Internal/external triggering
• Processor control via USB/CAN
• Remote control via keypad
• No external water cooling

Applications :

• Marking
• Engraving
• Micromachining
• Ablation
• Drilling
• Cutting
• Structuring
• Trimming
• Mask repair
• Cleaning

Ekspla

Industrial Q-switched DPSS laser Fusion Series

A diode pumped solid state q-switched nanosecond Nd:YVO4 lasers offer high output power of infra-red (1064 nm) radiation together with high repetition rate.

Featuring up to 15 W output power at 1064 nm and high 100 kHz repetition rate Indie series DPSS lasers are an attractive tool for wide range of material processing applications, including metals, semiconductors, composites, dielectrics.

Features :

• 15 W output power at 1064 nm
• High brilliance radiation
• Up to 100 kHz repetition rate
• Robust and sealed cavity
• Low operating costs
• Electro-optical Q-switching
• No first pulse problem
• Internal output power monitoring
• Internal/external triggering
• Processor control via USB/CAN/RS232
• Remote control via keypad
• No external water cooling

Applications :

• Marking
• Engraving
• Micromachining
• Ablation
• Drilling
• Cutting
• Structuring
• Trimming
• Mask repair
• Cleaning

Ekspla

Indie Nanosecond Q-Switched Diode Pumped Nd:YVO4 Laser

A Q-switched diode pumped solid state Nd:YVO4 UV lasers offer up to 3.5 W output power at 355 nm.

High beam quality together with short pulse duration and high output power make the Techno series Q-switched DPSS laser to high brilliance source (tool) for processing of almost all engineering materials used in semiconductor and electronic industry.
Short pulse duration, high 100 kHz. repetition rate and robust design make these Q-switched DPSS UV lasers an attractive choice for wide range of material processing applications, including polymers, semiconductors, composites, dielectrics.

Features :

• 3.5 W output power at 355 nm
• High brilliance UV radiation
• Up to 100 kHz repetition rate
• Robust and sealed cavity
• Low operating costs
• Electro-optical Q-switching
• First pulse suppression
• Internal output power monitoring
• Internal/external triggering
• Processor control via USB/CAN
• Remote control via keypad
• No external water cooling

Applications :

• Marking
• Engraving
• Micromachining
• Ablation
• Drilling
• Cutting
• Structuring
• Trimming
• Mask repair
• Cleaning

Ekspla

Techno Q-Switched Diode Pumped Nd:YVO4 UV Laser

A Q-switched diode pumped solid state Nd:YVO4 lasers offer up to 5.5 W output power at 532 nm.

High beam quality together with short pulse duration and high output power make the Jazz series Q-switched DPSS laser to high brilliance source (tool) for processing of most engineering materials used in semiconductor and electronic industry.
Short pulse duration, high 100 kHz. repetition rate and robust design make these nanosecond Q-switched DPSS lasers an attractive choice for wide range of material processing applications, including metals, semiconductors, composites, dielectrics.

Features :

• 5.5 W output power at 532 nm
• High brilliance radiation
• Up to 100 kHz repetition rate
• Robust and sealed cavity
• Low operating costs
• Electro-optical Q-switching
• First pulse suppression
• Internal output power monitoring
• Internal/external triggering
• Processor control via USB/CAN
• Remote control via keypad
• No external water cooling

Applications :

• Marking
• Engraving
• Micromachining
• Ablation
• Drilling
• Cutting
• Structuring
• Trimming
• Mask repair
• Cleaning

Ekspla

Jazz Nanosecond Q-Switched Diode Pumped Nd:YVO4 Green Laser

A Q-switched diode pumped solid state Nd:YVO4 lasers offer up to 0.4 W output power at 266 nm.

High beam quality together with short pulse duration and high output power make the Glam series Q-switched DPSS laser to high brilliance source (tool) for processing of most engineering materials used in semiconductor and electronic industry.
Short pulse duration, high 100 kHz.
repetition rate and robust design make these nanosecond Q-switched DPSS lasers an attractive choice for wide range of material processing applications, including metals, semiconductors, composites, dielectrics.

Features :

• 0.4 W output power at 266 nm
• High brilliance UV radiation
• Up to 100 kHz repetition rate
• Robust and sealed cavity
• Low operating costs
• Electro-optical Q-switching
• First pulse suppression
• Internal output power monitoring
• Internal/external triggering
• Processor control via USB/CAN
• Remote control via keypad
• No external water cooling

Applications :

• Marking
• Engraving
• Micromachining
• Ablation
• Drilling
• Cutting
• Structuring
• Trimming
• Mask repair
• Cleaning

Ekspla

Glam Industrial Q-Switched Diode Pumped Nd:YVO4 UV Laser

PL11M series picosecond diode pumped laser offers 1 W output power at 1064 nm.

It features high 1 MHz repetition rate, short 10 ps pulse duration and excellent beam quality (M² < 1.5). Stable output parameters and rugged cost-effective design establish PL11M series lasers as an ideal choice for micromachining applications.

Features :

• High up to 1 MHz repetition rate
• Short pulse duration ~10 ps
• High stability and excellent beam quality M2<1.5
• Reliable hands-free operation
• Compact and simple design
• PC control and remote control keypad
• Low maintenance costs
• Single-phase powering
• No external cooling water

Applications :

• Paterning
• Structuring
• Ablation
• Micromachining
• Spectroscopy
• Inspection

Ekspla

PL11M High Repetition Rate DPSS Picosecond Laser

NT200 series tunable laser systems integrate into a single compact hous-ing a nanosecond Optical Parametric Oscillator (OPO) and Diode-Pumped Solid–State (DPSS) Q-switched pump laser.

Features :

• Integrates DPSS pump laser and OPO into single housing
• Separate output ports for the pump laser and OPO beams
• OPO output wavelength range from 210 nm to 12 000 nm
• Pulse repetition rates from 100 Hz to 2500 Hz
• Narrow linewidth
• Hands-free tuning
• 3–5 ns pulse duration
• Remote control pad
• PC control via RS232 and LabView drivers

Ekspla

NT 200 Serie Nanosecond Tunable Wavelength Laser Systems

PL10100 series picosecond diode pumped laser offers 10 W output power at 1064 nm.

Features

• High pulse energy up to ~ 200 µJ
• Up to 100 kHz repetition rate
• Short pulse duration ~10 ps
• High stability and excellent beam quality M2<1.5
• 10 W output power at 1064 nm
• Reliable hands-free operation
• Low maintenance costs
• Single-phase mains electrical connection
• No external cooling water

Applications

• Material processing
• Micromachining
• Ablation
• Marking /Cutting /Drilling
• Structuring

Ekspla

PL10100 Series Diode Pumped Picosecond Lasers