The UDT-4X4D is a 4 array of superblue enhanced photodetector.

The standard LCC package allows easy integration into your surface mount applications.

Main Features:
• very High speed response
  
• Extremely low cross talk
  
• Surface mount design

Applications:
• Scattering measurement
  
• Position sensing

The FCI-InGaAs serie is available with 4,8,12,and 16 channels .Each AR coated element are capable of 2.5Gbps data rates exhibiting high responsivity from 1100 to 1620nm.
FCI-InGaAs-XXM, which comes standard on a wraparound ceramic submount, is designed for multichannel fiber applications based on standard 250mm pitch fiber ribbon. Also, board level contacts of 500mm make it easy to connect to your circuit. Upon request, 55um active area 4 channel arrays are available.

Main Features:
• High speed
• High responsivity
• Low noise
• Spectral range: 900 to 1700nm
• Gigabit Ethernet /Fibre channel
• SONET/SDH , ATM
• Optical Taps

Applications:
• High speed optical communication
• Single/muli mode fibre optic receiver

The FCI-GaAs serie is avialable with 4,12 element GaAs PIN photodetector array designed for hig speed fiber receiver and monitoring applications.
The 70μm diameter elements are capable of 2.5Gbps data rates.
This array is a perfect receiver for SM or MM fiber ribbon with 250μm pitch.

Main Features:
• High speed
• High responsivity
• AR coated elements
• Spectral range: 650 to 860nm

Applications:
• Fiber optic receiver
• DWDM
• SM or MM fiber ribbon
• parallel interconnects

The FCI-InGaAs -300B1 serie are multi-fonctional backside illuminated photodiode/arrays.They come in standard in a single element diode or 4-8 elements array with active area of 300µm.

Main Features:
• Back illumination
• High responsivity on both front and back
• Spectral range 900nm to 1700nm
• Low noise
• Instrumentation and analog receivers
• Fast Ethernet
• Single/Mulit mode fibre optic receiver

Applications:
• High speed optical communications
• Mulit fibre optic receiver
• Power monitoring

Array optimized for UV , Visible or Near IR Range-Muli-channel array photodetectors consist of a number of single elements photodiodes laid adjacent to each other.
They feature low electrical cross talk and super high uniformity between adjacent element allowing very hig precision measurement.

Main Features:
• Ultra Low cross talk
• UV enhanced
• Low dark current
• Low capacitance

• High speed photometry
• Computed tomography scanners
• Position sensors

Applications:
• Level meter
• Optical spectroscopy
• Medical equipement

The HgCdTe detectors can be fabricated in quadrant arrays for tracking and positioning systems, scanning systems and night vision equipment.


The quadrant arrays require a common lead between the four elements in either the X or Y direction.

Scintillator Compatible Photodiodes :
It's 16 element arrays mounted on PCB. For X-ray or gamma application, these muli-channel detector offer scintillator-mounting options: BGO,CdW04 or CsI(TI).

When coupling to a scintillator, theses Si arrays map any medium or high radiation energy over to visible spectrum vai scattering effect.

Main Features:
• Scintillator platform
• 5 Volts Bias
• Channel spacing variety

Applications:
• Position sensors
  
• Multi-Channel Gamma counting
  
• X-ray security systems