BeamTrack is a new, unique series of thermal detectors that combine multiple functions in one device: power, energy, beam position and beam size.
BeamTrack sensors are the only laser detectors able to measure power, position, size (PPS), energy, centering and wander in a single device. Sensors are available in a range of aperture sizes from 12mm to 50mm. The device divides the signal into quadrants measuring and comparing the output to determine the position of the center of the beam thus providing the ability to track the beam wander.

The 3A-P-THz is designed to measure THz light sources from very low power to very high power, up to 3W, 30x the power levels of competing products.

In addition, it is the only power/energy sensor on the market that is traceable to standard laboratory calibration. The 3A-P-THz is the only power/energy meter to have been calibrated to read THz radiation at the PTB national metrology institute in Germany.

It measures short pulse or CW lasers in the 0.1 to 10THz wavelength range.

Optical power can be measured from 50μW to 3W, and energy from 20μJ to 2J.

The 3A-P-THz is less expensive than traditional systems and is compatible with all Ophir meters and PC interfaces.

The Comet series is high power water cooled thermal sensors that is simple to use, economical but also highly accurate. It operates by measuring the heat rise from a 10 second exposure to a laser beam and thereby calculates the laser power.

• Comet 1K:Portable low-cost power probe for low powers - Ø50mm - 0.2-20μm - Power range: 20W-1kW
• Comet 10K Portable low-cost power probe for high powers - Ø100mm CO2 , YAG & CO2 - 200W-10kW
• Comet 10K-HD Portable low-cost power probe with high damage threshold - Ø55mm CO2 200W-10kW

For CW and Single Shot Energy- mW to kW - mJ to 300J.
Main Features:

• The highest damage threshold in the industry
  
• Models for 1500W, 5000W and 10KW for high power laser measurement
  
• LP coating that can withstand up to 6KW/cm2 (at maximum rated head power)
  
• Energy damage threshold up to 250J/cm2
  
• Single pulse energy measurement up to 600 joules
  
• Sensitive meters to measure power down to 40µw and energy down to 7µj
  
• Fibre optics adapters & Accessories for thermal heads